DP1308A Nagyobb kép

DP1308A

RIGOL RIGOL

Új

DP1308A programozható lineáris tápegység. Kimenő teljesítmény 80W, 3 kimenet, +25V/1A; -25V/1A; 6V/5A, időzíthető kimete, túlfeszültség, túláram és túlmelegedés elleni védelem, USB host- és device, LAN(LXI-C class), GPIB.....

Több információ

A termék nem kapható

218 610Ft

ÁFA nélkül

 

  • Separate Control and Independent 
  • Triple Outputs:+6V/5A,+25V/1A,-25V/1A,total 80W power 
  • The +6V channel output is electrically isolated from ±25V channel output to minimize the interference between the circuits under test 
  • Low ripples noise: < 350 μVrms/2 mVpp 
  • Excellent line regulation rate: < 0.01% + 2 mV (voltage), < 0.01% + 250 μA (current) 
  • Excellent load regulation rate: < 0.01% + 2 mV (voltage), < 0.010% + 250 μA (current) 
  • Fast Transient Response Time:<50μs 
  • ±25 channels have output tracking functions: the change of voltage value in one channel can be reflected in the other channel 
  • Overvoltage and Overcurrent protection functions 
  • Two-level overtemperature protection function Store and recall system setups 
  • Supports Timing setting 
  • Real time V/A/W waveform display mode : dial plates with pointer and V/A/W values 
  • On-line help,Chinese & English interface and input 
  • Comprehensive Connectivity and Remote Control Interface:USB Device, USB Host, LAN and GPIB (IEEE-488) 
  • Support USB flash device storage 
  • Support remote control via Web and SCPI commands 
  • Conform to LXI-C class instrument standards (version 1.2)

 

Model
Output Ranges/Channels
+6 V
+25 V
-25 V
DC Output ( 0℃ - 40℃)
Voltage
0 to +6V
0 to +25 V
0 to -25 V
Current
0 to 5 A
0 to 1 A
0 to 1 A
Overvoltage Protection
0.1 V to 6.5 V
0.1 V to 27 V
-0.1 V to -27 V
Overcurrent Protection
0.1 A to 5.5 A
0.1 A to 1.2 A
0.1 A to 1.2 A
Load Regulation± (output percentage + offset)
Voltage
< 0.01% + 2 mV
Current
< 0.01% + 250 μA
Line Regulation± (output percentage + offset)
Voltage
< 0.01% + 2 mV
Current
< 0.01% + 250 μA
Ripple and Noise (20 Hz - 20 MHz)
Normal Mode Voltage
< 350 μV rms/2 mVpp
Normal Mode Current
< 2 mA rms
< 500 μA rms
Common Mode Current
<1.5 μA rms
Accuracy 12 Months[1] (25℃±5℃)±(output percentage + offset)
Programming
Voltage
0.1% + 5 mV
0.05% + 20 mV
 
Current
0.2% + 10 mA
0.15% + 4 mA
Read Back
Voltage
0.1% + 5 mV
0.05% + 10 mV
 
Current
0.2% + 10 mA
0.15% + 4 mA

Nincsenek még vélemények.

Írd meg véleményed

DG1032Z

DG1032Z 2 csatornás, 32MHz-es (200MS6s) multifunkciós funkció/arbitrary generátor, mely jól használható ipar-, kutatás fejlesztés és az oktatás területén.